Sean Herrington

Instrumentation engineer for the last 30 years specialising in process analytical Instrumentation and process control.

PFA Sampling in Power Stations

PFA Sampling in Power Stations

Automatic Sampler success Sentry Equipment USA and J W Industrial Instruments Australia have achieved significant success with the installations of RX 90 degree automatic samplers handling pulverized fly ash (PFA). Various types of Sentry Sampling Systems are used throughout Australia but this installation is the first in the power generating industry. Installation in Pulverised Fly […]

PFA Sampling in Power Stations Read More »

beer brewing

Beer blending and Wort cooking using in line analysers

High Gravity beer blending Brewers need a blending system to cut or dilute high gravity beer because by brewing at higher than sales strength and adding water at a later stage, the actual volume of beer being processed is reduced. Considerable energy savings can be achieved by boiling the wort and chilling the beer, and

Beer blending and Wort cooking using in line analysers Read More »

Glycol monitoring using an in line refractometer

Glycol concentration analysis We were recently asked by a pharmaceutical client to test if it would be possible to use a Maselli UR62 process refractometer to monitor the concentration of the glycol in the refrigeration system. Application information Factory type: Pharmaceutical plant.Process: Refrigeration system: ammonia based refrigeration systemInstallation point: Glycol mixing tank Installation The UR62 unit is

Glycol monitoring using an in line refractometer Read More »

How to measure Moisture and Resin in MDF board

Application feasibility studies New, modified, and problem applications often require analysis by our Applications Lab in order to determine feasibility and optimum instrument parameters. Selection of the best NIR filter combinations is often critical to the success of the measurement. In order to do this, customer samples are normally scanned on a spectrophotometer in order

How to measure Moisture and Resin in MDF board Read More »

Sustainability benefits of changing to a 12 month CO2 polishing system

CO2 Polishing filters CO2 is a very common gas in the carbonated beverage market. As the CO2 is regarded as an ingredient once it enters the beverage there are guidelines for the CO2 purity when used in this way. Guidelines on acceptable contaminant levels are released by the international society for beverage technology (ISBT).  Gas

Sustainability benefits of changing to a 12 month CO2 polishing system Read More »

refractormeter

Why quality assurance and manufacturing managers need process refractometers

Refractometers are an important diagnostic tool Refractometers are becoming an increasingly important tool in quality assurance and manufacturing processes. They are used to measure the refractive index of a liquid, which can help identify and correct problems with products or manufacturing processes. In this blog post, we’ll discuss why quality assurance and manufacturing managers should

Why quality assurance and manufacturing managers need process refractometers Read More »

NIR Moisture measurement and control in Coal mining applications

  Moisttech NIR Sensors for continuous Moisture Measurement in Coal Moisture measurement and control is a crucial aspect in coal and minerals processing plants. In the past an array of different technologies have been used with limited success. Technologies such as microwave and gamma  were used for many years but installation, calibration and the general

NIR Moisture measurement and control in Coal mining applications Read More »

Shopping Cart
Scroll to Top